By Using Microsoft Fixit utility
Follow the link to download Microsft FixitIt utility and run it.
By Using Microsoft Fixit utility
Follow the link to download Microsft FixitIt utility and run it.
To connect to a wireless network, turn on your Wireless Switch and follow these steps
1. If a wireless network is available, you will be notified with an icon as shown in the image below
2. Click on the icon and it will show up the Wireless Network Name and the option to connect.
It is easy to configure your Blogger account with Windows Live Writer. To configure Windows Live Writer with your account, you should have the following information ready
Your Blogger Address
Your Blogger Username
Your Blogger Password
Open Windows Live Writer
(If Windows Live Writer is not installed on your PC, follow the link to download it)
Click Next and proceed with the configuration
Choose Other Services which includes blogger and click Next
At “Add a blog account” screen, Enter you blogger address followed by your username and password
Proceed by clicking Next and Windows Live Writer will check the configuration
If the entered information are correct, you will be taken to to the final screen where it will ask you to type your blog’s name. Enter The name and click Finish
That’s it! Happy Blogging!
Good News! Helping Hands Igbo has been released! The new version comes with a built-in keyboard layout for your learning convenience.
Vowels: a e i ị o ọ u ụ
Consonants: b ch d f g gb gh gw h j k kp kw l m n ṅ nw ny p r s sh t v w y z
Helping Hands Igbo can be downloaded by clicking Here!
Credits goes to my friend, Ben Ajuluchukwu, who helped with the symbols
FAQ
1. What is Helping Hands Igbo?
Ans: Helping Hands Igbo is a Inkey Software Compatible keyboard created for Igbo Language, Nigeria. With Inkey Software and Helping Hands Igbo, people can type documents in Igbo Language.
4. What is Inkey?
Ans: InKey is a keyboard mapping solution that allows users to enter characters in languages and scripts that are not adequately supported by the operating system using a standard keyboard.
3. Where can I get Inkeysoftware?
Ans: Inkeysoftware site is under upgradation. Contact Helping Hands, to get Inkey Software.
Some times you might have faced problem with your CD/DVD drive, which will ot detect properly
Reason:
The registry entry of your disc burning software might not have removed properly
Due to hardware error (The CD/DVD drive might have become totally unusable)
Fix:
In Run window, type in: regedit and press Enter
At the Registry Editor window, locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
If the Upper filters key is available,right-click and delete it.
and in the same way delete the Lower filters key also
close registry editor
If you want to accomplish the steps above automatically, try this FixIt from Microsoft
This should fix the problem if the issue is with the filter buffers.
try checking the power and data cables of the CD/DVD drive. make sure the cables are properly connected.
If the above doesn’t fix the issue, replace the CD/DVD drive.
Your desktop may not display properly due to following general reasons
Improper power supply
Improperly connected Power and Display Cords
Improperly connected Display ports
Troubleshooting:
Make sure the power supply is connected and the power buttons are turned on
Reconnect the display and power cords and ensure the connections
Check the quality condition of display and power cords. if required, replace the cords
Identify the correct graphics port (display port/ DVI/VGA) and connect to it (All these port cables will only fit into its exact port)
Try connecting your desktop to a different monitor and if you identify your pervious monitor is faulty, replace it.
It is possible to schedule a time for your Ubuntu PC to go off. For this you can type a simple command at the terminal window
sudo shutdown –h +m
(Replace the m with your desired minutes for the computer to go off)
You will be prompted to enter the password. Type in the password and press enter
If you want to cancel the scheduled shutdown, the command is: sudo shutdown –c
Terminal will ask you for the sudo password. type the password and press enter
(Try the sudo shutdown –c command in a new terminal for proper result)
User Accounts can be created and password protected from terminal. This can be accomplished by typing two commands.
To create a user account type the following command:
sudo useradd –d /home/Andes_Noraa –m Andes_Noraa
In this example, the Username and Account folder name is: Andes Noraa
(You can give a different one)
To add password for your account, type in: sudo passwd Andes_Noraa and press enter
Terminal will ask you to type a new password and after that to re-enter
That’s it! The User Account has been created and Password Protected now.